Product Descriptions:

Package includes 1 stepper motor + 1 JK0220 V2 stepper motor driverHigh holding torque at high speed.A stepper motor is an electric motor that is able to create movements.It is widely used in 3D printer, monitor //Textile/ Packaging Machinery, Lighting,ect.

Stepper Motor Detail Parameters:

Model:JK42HS48-1684-01Holding Torque: 50N.cmCurrent / Phase: 1.68ARated Voltage: 2.8VPhase Resistance: 1.65ΩPhase Inductance: 2.8mHShaft Diameter: 5mmShaft Type: Round Type ShaftNumber of leads: 4-leadsWeight: 0.4kgScope:3D Printers, Monitor Equipment, Machinery, Textile Machinery, Packaging Machinery, Lighting, ect.

JK0220 V2 Detail Parameters:

Characteristics：1.DC power input type:12V~36VDC 2.Output current:0.25A-2.0AMircostepping:1(1.8º)、1/2、1/4、1/8、1/16、1/32、1/64、1/128Pulse/rev: 200, 400, 800, 1600, 3200, 6400, 12800, 25600.3.Dimensions：96mm×60mm×24.5mm4.Weight：<200g.5.Working environment：Temperature-15～80℃

I/O Ports：

1.GND,：VDC+: it input DC power Note:Must guard against exceeding 36V, so as not to damage the module2.A+、A-：Stepping motor one winding 3.B+、B-：Stepping motor other winding4.PUL ：Stepping pulse input5.DIR：Stepping motor direction input6.VCC：power supply port for inside optical coupling7.EN: motor free

NOTE：

1. When ambient temperature is high or working current over 1.05A, fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time. 2. Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric