• Mixing of any two colors without color cast or uneven spot
• A single color is lit, evenly distributed in the light-emitting area
• It is convenient for secondary optical matching of products
• Suitable for intelligent controllable colorful lighting places
• Compact 100W RGBW COB chip with small luminous surface, high power and high luminous flux

• Total power: 200W

• Color.:  Red / Green / Blue / White (RGBW)

• LEDs type:　COB

• LED chip sizes:   42Mil

• Viewing angle:   120 degree

• Luminous flux:    See above table

• CRI: N/A

• Base material:    The mirror aluminum

• LED junction temperature:    125°

• LEDs arrangement     See above table

• Input current for a single color: 1600mA

• LED integrated board  input voltage: See above table

• ESD:  2000V

Outer dimensions:  40x40mm

Diameter of light-emitting surface: Ø26mm

Storage:

To avoid moisture, we recommend storage conditions for the unopened LED +5 ~ +30℃

relative humidity <60%. LED should be used within 168 Hrs. of opening the package. Please

make sure to dehumidify and vacuum pack the remaining/ unused LED. Dehumidifying condition:

+120℃±5℃ of 4Hrs. Effective age for the sealed led is one year.

The soldering precautions:

Soldering conditions: Reflow soldering is not recommended for this LED. If hand soldering,

set sol-dering iron temperature at 350℃ and soldering time not More than 3.5 seconds, after

the first soldering, make sure the substrate surface temperature returns to ambient temperature

before a second soldering. Please. make sure when soldering, there is no external force on the

soldering surface and silicon batardeau (such as pressure, friction or sharp metal nails, etc.),

to avoid gold wire deformation or dam-age and other abnormalities. If beyond recommended

conditions, we cannot guarantee the LED stability, please do the risk assessment first. During

assembly, please ensure that a good quality thermal paste is applied and distributed evenly over

the surface. While using thermal pad (Heat Sink), make sure LED is firmly tightened and there

is no gap between surfaces. In such heat-media products, through a pressure test of at least

500 volts.

Anti-Static Measures:

Temperature control:

Drive this product at constant current. Output current range specifications should be

ac-cording to the operational and other conditions, as mentioned in data sheet. Before using

a constant voltage source or altered specifications other than recommended, please consider

risk factors.