• INSTRUCTIONS：

1. Press the ON/OFF button. LED display will display the Time and Temperature after warm up.

2. Press "M" to choose desired mode(Date/A1/A2/A3/Time). To choose a mode, long press "M" when the desired mode appears on the screen, then to enter the setting state, and to adjust the setting digit.

3. Press the arrow button: UP/DOWN to advance or decrease the digit rapidly.

• TIME FIXED DISPLAY:

Turn on/off the time fixed display function by pressing the "UP" button. (dp-1 shows Time and Date are displayed at intervals; dp-2 and dp-3 show Time fixed display).

• POWER-SAVING:

Turn on/off the power-saving function by pressing the "DOWN" button.(ON with display ONSd and OFF shows--Sd). Press twice to switch Standby or Power saving status.

• ALARM:

Press "M" to choose desired mode(- -A1/--A2/--A3), A1/A2/A3-three sets of alarm clocks, long press "M" when the desired mode appears on the screen, then set the alarm clock. If you no longer need the alarm, press "M" to choose desired mode(A1/A2/A3) you have set, then press the "DOWN" button, it will displays the - -A1, --A2 or --A3 (ON with display ONA1/ONA2/ONA3 and OFF shows- -A1/--A2/--A3)

A. When Alarm is set, an indicator clock will illuminate on lower left corner of the time

B. When Alarm sounds, press any button to silence. If Alarm is not silence, it will turn off after 60 seconds and reset for the next day.

• TIME：

A. Setting range:

·Hour: 12H or 24H

·Day: 1-31

·Month: 1-12

·Year:2000-2099

B. Setting detail:

·dp-1: Display the Date for 15 seconds and then display the Time

·dp-2 and Dp-3: Display the time

• TEMPERATURE:

A. At start up, the current temp is automatically detected and display. Default temp unit is 0℃-50℃（32℉-122℉). Temp will automatically update every 60 seconds.

B. To switch to Fahrenheit/Celsius, press the down arrow button for 2 seconds.

C. The temperature will always display except for Power-save mode(NO).

• EXTERNAL POWER-OFF PROTECTION:

If power supply is interrupted, clock function will keep time though the LED display will turn off and buttons will be unresponsive. Once powered is restored, the time will resume appropriately.