Description

Multi-function digital display time relay 5V12V24V timing switch pulse trigger cycle on-off delay module

Function list: The function can be arbitrarily set by yourself when you buy it back, and the manual is provided; any parameters that can be set can be memorized when the power is turned off

PJ1: Jog (the signal relay is pulled in, the signal disappears and the relay stops)

PJ2: Self-locking (give a signal relay to pull in, and give a signal relay to stop)

PJ3: Give the signal, the relay will stop automatically for A second; the trigger is invalid during the delay period

PJ4: Give the signal, the relay will stop automatically for A second; trigger re-time during the delay period

PJ5: Give the signal, the relay will stop automatically for A second; trigger the superposition timing during the delay period

PJ6: Give the signal, the relay will stop automatically for A second; trigger reset during the delay period

PJ7: Give the signal, the relay is closed, the input signal is disconnected, the power is turned off after starting the timing A second, the signal is kept output again during the delay period, and the timing stops

After the PJ& is energized, the relay will pull in immediately, and the power will be turned off after a delay of A seconds; until the next power on

P・21: Give the signal, after a delay of A seconds, the relay will close

P・22: Give the signal, after more than A seconds, the relay will pull in, the signal will disappear, and the relay will stop

P・23: After the signal disappears for more than A seconds, the relay is pulled in, there is a signal, and the relay stops

P・24: After there is a signal for more than A seconds, the relay closes, and after the signal disappears for more than A seconds, the relay stops

P・25: After there is a signal for more than A seconds, the relay pulls in, and when there is another signal for more than A seconds, the relay stops

P・26: There is a signal that the relay pulls in for A second and stops, and the signal disappears and the relay pulls in again and stops after A second

P·27: When there is a pulse signal detected, the relay stops; if there is no pulse signal, the relay delays for A second to pick up; (the signal continues or the signal disappears, it is regarded as no pulse signal)

After P・2& is powered on, after a delay of A seconds, the relay will close until power off

P・31: After the power is turned on, the relay will be closed for A seconds and disconnected for B seconds, infinite loop; power off and stop

P・32: If there is a signal, start P・31 infinite loop; if the signal disappears, stop the loop

P・33: Give a signal to start the infinite loop of P.31; give a signal again to end the loop

P-34: After the power is turned on, after a delay of A seconds, the relay pulls in, and stops after pulling in B seconds

P・35: There is a signal, after a delay of A seconds, the relay will pick up, and it will stop after picking up for B seconds

P・36: There is a signal, after A seconds, the relay will be closed, and it will stop after B seconds, the signal disappears, and the timer is cleared and stopped

P・37: If there is a signal, the relay will automatically stop for A second, and it will count B seconds after it stops. If the signal is triggered within the A+B time, the signal will be invalid. Then, pull in again and automatically stop for A second. P·41: No action when there is a signal; trigger when the signal disappears; disconnect after the output start delay A time

P·42: The signal disappears, after the delay time A, the auxiliary output starts; the working time B ends

P-43: After the signal disappears for more than the A time, the output starts; the work B time ends

P-44: After the power is turned on, the output starts A time, and stops B time; the cycle C times automatically stops.

P·45: No action after power-on, after the signal is given; output start A time, stop B time; cycle C times and automatically stop; give the signal again, execute again

P-46: After the signal is given more than A times, the output starts; the output is maintained; the power off stops

P・47: After the signal is given more than A times, the output starts and stops for B seconds

P・4&In C seconds, after continuously giving the signal more than A times, the output starts and stops for B seconds