Description
Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
Channel: 4 CH
Remote Control Distance:0-50m
Encode: EV1527
Frequency:315 or 433 MHz
Size: 55mm x 30mm x 13mm
Power Supply: 2 X CR2016 3V Lithium Battery( NOT included)
2.Receiver
1)Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Toggle , Change it by yourself.)
Power Supply (Operating Voltage): AC 85V-265V
Relay: 30A/250V A/30VDC
Sensitivity:-107 dBm
Operating Temperature:-40‘C ~ 80’C
Standby power consumption :0.5ma
Encode:Fixed code and Learning code
Load:Resistive load <=3000W Inductive load <=2000W
3.Package Included
1 x Receiver (with cover)
1/2 x Transmitter (no batteries inside)
4.Learn code and Remove Code
Learning Code
Input AC85V-265V for the receiver,then press the learning button,the LED indicator turns ON,then press any key on the transmitter,the indicator flashes 3 times and turns off.it means learning sucessfully.
Clearing Code
Press the Learning Button and hold about 8 seconds, the LED indicator from OFF to ON, it means clearing successfully.